This module provides the necessary knowledge to use widely used software for tunnel stability analysis, including exercises on stability analysis of blocks and stress-strain behavior.
DIPLOMA IN GEOTECHNICAL TUNNEL DESING
BRIEF SUMMARY
This diploma seeks to train engineers and geologists in the subject of Geotechnical Design of tunnels. The development of underground works is of great importance in mining, civil, hydraulic transportation and storage projects.
By studying the geological and geomechanical variables present in the construction areas of underground works, it is possible to establish the governing factors that define their positioning, dimensions with support and fortification requests.
For this reason, projects that involve construction of underground spaces demand specialized professionals who are capable of knowing and carrying out a correct geotechnical design of tunnels, through the interpretation of geological, structural, hydrogeological and geomechanical modeling data.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
SYLLABUS:
► Module 1: Introduction and general concepts to modeling
► Module 2: Modeling elements for conventional tunnels
► Module 3: Modeling elements for tunnels excavated by TBM
► Module 4: Analytical Methods and Numerical Methods
► Module 5: Use of Software Numerical Modeling
► Module 6: Tunnel waterproofing methods
► Module 7: Special modeling cases
► Module 8: Thesis project
PARTICIPANTS:
Professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, rock engineering, rock mechanics, planning, geotechnics, geomechanics, geology, mining safety and professionals who require greater knowledge her.
Likewise, professionals from mining contracting companies, infrastructure, consultants, university professors and students and the general public who are involved in the topic.
TESTIMONIALS
The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
CERTIFICATION
►Certificate of approval for each module and diploma of the complete Diploma issued by the International Geotechnical Center.
►Certificates and diplomas do not indicate the training modality.
► Each diploma has a unique identification code to verify its authenticity.
STARTING DATE
►The diploma is available at any time. The start dates of the course will depend on your time availability.
DURATION
► 10 month) 7-month modules + 3 months dissertation)
ACADEMIC HOURS
►280 academic hours
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆ Cellphone-Whatsapp:(51) 987 392 885
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
information@centrogeotecnico.comcentrogeotecnico.com
Lima - Peru
PRESENTATION
This diploma seeks to train engineers and geologists in the subject of Geotechnical Design of tunnels. The development of underground works is of great importance in mining, civil, hydraulic transportation and storage projects.
By studying the geological and geomechanical variables present in the construction areas of underground works, it is possible to establish the governing factors that define their positioning, dimensions with support and fortification requests.
For this reason, projects that involve construction of underground spaces demand specialized professionals who are capable of knowing and carrying out a correct geotechnical design of tunnels, through the interpretation of geological, structural, hydrogeological and geomechanical modeling data.
BENEFITS
► Receive certificates and a diploma in the name of the International Geotechnical Center - IGC.
► Learn from a speaker with extensive experience in the subject.
► Receive slides and materials for each module.
► Access and view video classes of the modules through the CGI Virtual Campus.
► Have the ability to make academic inquiries through the CGI Virtual Campus forum as needed.
► Access the modules from wherever you are via your computer and the internet.
► Enjoy a privileged perspective on classes compared to an in-person diploma program.
SYLLABUS
► Module 1: Introduction and General Concepts of Modeling
► Module 2: Modeling Elements for Conventional Tunnels
► Module 3: Modeling elements for tunnels excavated by TBM
► Module 4: Analytical Methods and Numerical Methods
► Module 5: Use of Software Numerical Modeling
► Module 6: Tunnel Waterproofing Methods
► Module 7: Special Modeling Cases
► Module 8: Thesis Project
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, slideshows, materials and questions to the speaker.
At the end of every module, the student must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you train efficiently.The hours dedicated to each module must be managed assertively to optimize the benefit.
You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
Professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, rock engineering, rock mechanics, planning, geotechnics, geomechanics, geology, mining safety and professionals who require greater knowledge her.
Likewise, professionals from mining contracting companies, infrastructure, consultants, university professors and students and the general public who are involved in the topic.
TESTIMONIALS
The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
COSTS, SYLLABUS, OTHERS:
To serve you correctly, we handle several quotes that are based on the various needs of our clients.
We have implemented an automated system that will take care of you. We would appreciate it if you register and the system will automatically send you to your email:
► Brochure of the diploma (modality, duration, curriculum, others).
► Quotation of the diploma course (costs, means of payment, forms of financing, others).
► Immediate free access to a DEMO course in the virtual campus so that you can have an experience of it.
REGISTRATION FORM: Diploma Registration Form
NOTE: This registration will not generate any commitment with our institution, the objective is to be able to send you the information of the diploma course.
NEWSLETTER
If you like, you can also keep up to date with our activities and free contributions through our Message Center by entering here: http://goo.gl/qtmrHi
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉ information@centrogeotecnico.
www.centrogeotecnico.com
Lima – Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA
BRIEF SUMMARY
The development of underground structures is crucial in mining, civil, hydraulic transport, and storage projects. By analyzing geological and geomechanical variables in construction areas, it is possible to determine the governing factors that define their positioning, dimensions, and support requirements. Consequently, projects involving underground spaces require specialized professionals capable of performing accurate geotechnical tunnel design through the interpretation of geological, structural, hydrogeological, and geomechanical modeling data.TRAINING OBJECTIVES
►Provide the necessary tools to identify and interpret the geological, geotechnical, structural, and hydrogeological variables that form part of a tunnel construction project.BENEFITS
► Access to the International Diploma in geotechnical design of tunnels
► Get trained by a speaker with vast experience on the subject.
►Receive materials for each module such as slides, manuals and data that you can keep.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access to the network of professionals from various countries of the world. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field participate in our diploma course.
► Access to the database of queries and answers from the participants, as well as the technical reports generated in each module and the supporting theses.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
SYLLABUS► Introduction and General Characteristic
► Geological Characterization
► Structural Characterization
► Hydrogeological Characterization
► Geotecnical Characterization
TESTIMONIALS
Enrolled in different diplomas:The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉information@centrogeotecnico.
www.centrogeotecnico.com
Lima - Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA
BRIEF SUMMARY
In this module, students will gain the necessary knowledge to understand the elements involved in the geotechnical design of conventional tunnels. Advanced concepts related to laboratory testing, rock mass quality classification systems, excavation behavior types, excavation size selection, and reinforcement calculations will be covered.TRAINING OBJECTIVES
► Identify the various laboratory tests required to define the essential parameters for geotechnical design.
► Understand the parameters that comprise different rock mass classification systems and their practical application in the field.
► Identify the variables present in different geological environments of conventionally excavated tunnels and understand remediation measures for instability issues.
► Understand and assess the characteristics that determine tunnel size and their support requirements.
BENEFITS
► Access to the International Diploma in geotechnical design of tunnels
► Get trained by a speaker with vast experience on the subject.
►Receive materials for each module such as slides, manuals and data that you can keep.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access to the network of professionals from various countries of the world. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field participate in our diploma course.
► Access to the database of queries and answers from the participants, as well as the technical reports generated in each module and the supporting theses.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
SYLLABUS
► Laboratory tests
► Geomechanical Classifications
► Excavation Behavior Classes
► Selection of Excavation Size and Support Design Calculation
► Determination of Support Design Loads
TESTIMONIALS
Enrolled in different diplomas:The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉information@centrogeotecnico.
www.centrogeotecnico.com
Lima - Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA
BRIEF SUMMARY
This module covers the key elements of the geotechnical design of tunnels excavated with a Tunnel Boring Machine (TBM), including TBM excavation definition, associated risks and damage prevention, and the design of lining rings.TRAINING OBJECTIVES
► Identify the various components of TBM (Tunnel Boring Machine) excavators.
► Understand the risks associated with this type of excavation.
► Learn the treatments applied to soils excavated using TBM.
► Understand and evaluate the characteristics that define the lining rings, along with their classification.
BENEFITS
► Access to the International Diploma in geotechnical design of tunnels
► Get trained by a speaker with vast experience on the subject.
►Receive materials for each module such as slides, manuals and data that you can keep.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access to the network of professionals from various countries of the world. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field participate in our diploma course.
► Access to the database of queries and answers from the participants, as well as the technical reports generated in each module and the supporting theses.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
SYLLABUS► Definition and components of Tunnel Boring Machines (TBM)
► Risks and damages caused by settlement
► Ground treatment
► Prevention of damage due to ground settlement
► Lining rings: classification and design
TESTIMONIALS
Enrolled in different diplomas:The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉information@centrogeotecnico.
www.centrogeotecnico.com
Lima - Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA
BRIEF SUMMARY
In this module, the necessary knowledge will be provided to understand the mathematical methods used in support and rock mass calculations, presenting the current methodologies widely employed in tunnel design generation.TRAINING OBJECTIVES
► Understand the analytical methods used to create displacement curves.
► Comprehend the calculation principles and operation of numerical methods.
► Analyze the methodology of the convergence confinement method.
► Analyze how excavation curves are generated.
► Analyze how lining curves are generated.
BENEFITS
► Access to the International Diploma in geotechnical design of tunnels
► Get trained by a speaker with vast experience on the subject.
►Receive materials for each module such as slides, manuals and data that you can keep.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access to the network of professionals from various countries of the world. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field participate in our diploma course.
► Access to the database of queries and answers from the participants, as well as the technical reports generated in each module and the supporting theses.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
SYLLABUS► Analytical Methods
► Numerical Methods
► Convergence Confinement Method
► Excavation Curve
TESTIMONIALS
Enrolled in different diplomas:The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉information@centrogeotecnico.
www.centrogeotecnico.com
Lima - Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA
BRIEF SUMMARY
TRAINING OBJECTIVES
► Analyze the generation of blocks in rocks of different geotechnical quality.
►Analyze the generation of blocks in tunnel intersection zones.
►Analyze tunnel displacement using the Vlachopoulos and Diederichs methodology.
►Analyze tunnel stability in portal areas.
BENEFITS
► Access to the International Diploma in geotechnical design of tunnels
► Get trained by a speaker with vast experience on the subject.
►Receive materials for each module such as slides, manuals and data that you can keep.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access to the network of professionals from various countries of the world. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field participate in our diploma course.
► Access to the database of queries and answers from the participants, as well as the technical reports generated in each module and the supporting theses.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
SYLLABUS
► EXERCISE 1: Stability analysis of wedges by rock class using Unwedge
[Use of Dips and Unwedge software]
► EXERCISE 2: Stability analysis of wedges in intersections using Unwedge
[Use of Unwedge and RS2 software]
► EXERCISE 3: Calculation of permissible deformation using RS2
[Use of RS2 software]
► EXERCISE 4: Tunnel stability calculation in portal areas using RS2
[Use of RS2 software]
TESTIMONIALS
Enrolled in different diplomas:The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉information@centrogeotecnico.
www.centrogeotecnico.com
Lima - Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA
BRIEF SUMMARY
This module provides the necessary knowledge to identify the different techniques for treating infiltration water within tunnels.
TRAINING OBJECTIVES
► Analyze and identify drainage needs in tunnels.
► Analyze the methodology of waterproofing injections.
► Identify the appropriate injection products for different water infiltration scenarios.
BENEFITS
► Access to the International Diploma in geotechnical design of tunnels
► Get trained by a speaker with vast experience on the subject.
►Receive materials for each module such as slides, manuals and data that you can keep.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access to the network of professionals from various countries of the world. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field participate in our diploma course.
► Access to the database of queries and answers from the participants, as well as the technical reports generated in each module and the supporting theses.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
SYLLABUS
► Tunnel drainage systems
► Injection techniques
► Pre-excavation grouting
► Exercises
TESTIMONIALS
Enrolled in different diplomas:The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉information@centrogeotecnico.
www.centrogeotecnico.com
Lima - Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA
BRIEF SUMMARY
This module provides the necessary knowledge to identify phenomena such as squeezing, swelling, and rockburst. Additionally, topics on pull test testing and rock quality prediction systems using the Tunnel Seismic Prediction (TSP) technique will be covered.TRAINING OBJECTIVES
► Analyze and identify the factors involved in the generation of the squeezing phenomenon.► Analyze and identify the factors involved in the generation of the swelling phenomenon.
► Analyze and identify the factors involved in the generation of the rockburst phenomenon.
► Understand the necessary elements for performing Bolt Pull Tests.
► Analyze the methodology of the Tunnel Seismic Prediction (TSP) rock mass quality prediction system.
► Present the final thesis project for the diploma program.
BENEFITS
► Access to the International Diploma in Geotechnical Tunnel Design
► Get trained by a speaker with vast experience on the subject.
►Receive materials for each module such as slides, manuals and data that you can keep.
► Freedom to access a course on the day and at the time you want, as well as to pause and go back the class as many times as necessary until you fully assimilate the knowledge that is provided.
► Access to the network of professionals from various countries of the world. Technicians, university students, engineers, masters, doctors, post-doctors and the general public related to the professional field participate in our diploma course.
► Access to the database of queries and answers from the participants, as well as the technical reports generated in each module and the supporting theses.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
SYLLABUS
► Introduction
► Tunnels with Squeezing and Swelling
► Tunnels with Rockburst
► Pull Test Testing in Tunnels and Slopes
► Rock Quality Prediction System - Tunnel Seismic Prediction (TSP)
► Summary
TESTIMONIALS
Enrolled in different diplomas:The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉ information@centrogeotecnico.
www.centrogeotecnico.com
Lima - Peru
- Manager: Raquel Quiroz CGI
- Teacher: Guillermo RODRIGUEZ CAYLLAHUA