DIPLOMA IN DESIGN OF TAILING DAMS, MINE WASTE DUMPS AND LEACHING PADS.
BRIEF SUMMARY
The present diploma aims for the participant to understand the latest design criteria for tailings dams, mine waste dumps, and leaching pads. Additionally, they will be able to carry out the geotechnical analysis and design of each structure from the initial phases such as zoning of the deposits and the development of the geotechnical exploration plan, followed by material characterization and rigorous analysis of infiltration, stability, and deformations.
Finally, the participant will have knowledge of various technological alternatives for tailings disposal and concepts related to management, operation, and governance.
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, materials, slides and questions to the speaker. At the end of each course, you must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you be trained efficiently. The hours dedicated to each module must be managed assertively to optimize the benefit. You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
BENEFITS
► MSc. Brahiam Roman Cabrera
► Civil Engineer from the National University of Engineering (Peru)
► Master's Degree in Geotechnical Engineering from the University of Tokyo (Japan)
► PhD candidate at the University of California, Davis (United States)
► Over 10 years of experience in consulting, research, and Construction Quality Assurance (CQA) for large infrastructure and mining projects in countries such as Peru, Chile, Australia, South Africa, Argentina, and Panama, including hydroelectric power plants, roads, ports, tailings dams, waste dumps, and leaching pads.
► Nominated Representative of Peru to the TC-203 (seismic geotechnics) and TC-221 (Tailings and Mine Waste) committees of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE).
► Lecturer and thesis advisor at the Universidad Peruana de Ciencias Aplicadas (Peru).
SYLLABUS:
► Module 1: Introduction and General Topics
► Module 2: Tailings Deposits with Borrow Material Dam
► Module 3: Coarse Cycloned Sand Tailings Deposits (Underflow)
► Module 4: Filtered Tailings Deposits and Co-Disposal
► Module 5: Static Liquefaction in Tailings Deposits
► Module 6: Waste Dumps
► Module 7: Leaching Pads
► Module 8: Thesis Project
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
TESTIMONIALS
The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
CERTIFICATION
►Certificate of approval for each module and diploma of the complete Diploma issued by the International Geotechnical Center.
►Certificates and diplomas do not indicate the training modality.
► Each diploma has a unique identification code to verify its authenticity.
STARTING DATE
►The diploma is available at any time. The start dates of the course will depend on your time availability.
DURATION
► 10 month) 7-month modules + 3 months dissertation)
ACADEMIC HOURS
►280 academic hours
Request more information about the Diploma:
Click here to view the Diploma brochure
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆ Cellphone-Whatsapp:(51) 987 392 885
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
information@centrogeotecnico.com
centrogeotecnico.com
Lima - Peru
PRESENTATION
This diploma aims to provide the participant with knowledge of the latest design criteria for tailings dams, waste dumps, and leach pads in the field of geotechnical engineering. Additionally, they will be capable of performing geotechnical analysis and design for each structure, starting from the initial phases, such as zoning of the deposits and the development of a geotechnical exploration plan. Subsequently, they will characterize the materials and proceed with rigorous analysis of infiltration, stability, and deformations.
Ultimately, the participant will acquire an understanding of various technological alternatives for tailings disposal and concepts related to management, operation, and governance.
BENEFITS
► Receive certificates and a diploma in the name of the International Geotechnical Center - IGC.
► Learn from a speaker with extensive experience in the subject.
► Receive slides and materials for each module.
► Access and view video classes of the modules through the CGI Virtual Campus.
► Have the ability to make academic inquiries through the CGI Virtual Campus forum as needed.
► Access the modules from wherever you are via your computer and the internet.
► Enjoy a privileged perspective on classes compared to an in-person diploma program.
SYLLABUS
► Module 1: Introduction and General Topics
► Module 2: Tailings Deposits with Borrow Material Dams
► Module 3: Coarse Cycloned Sand Tailings Deposits (Underflow)
► Module 4: Filtered Tailings Deposits and Co-disposal
► Module 5: Static Liquefaction in Tailings Deposits
► Module 6: Waste Dumps
► Module 7: Leach Pads
► Module 8: Thesis Project
TRAINING MODALITY
The modality presented is the “Virtual-OFFLINE” (Virtual asynchronous); in this you will develop a course every 30 days, which is made up of videos, slideshows, materials and questions to the speaker.
At the end of every module, the student must take an exam to pass it and move on to the next course.
You will be assigned the tutoring of a specialist and there will be no limitations in terms of access hours or consultations with the speaker, this promotes that you train efficiently.The hours dedicated to each module must be managed assertively to optimize the benefit.
You will experience all of the above through our virtual campus, which will also allow us to monitor your progress.
PARTICIPANTS:
This diploma is aimed at professionals and technicians who work in mining, construction and/or energy companies and are working in the areas of engineering, planning, geotechnics, geomechanics, geology, mining safety and professionals who require a deeper knowledge of it.
Also professionals from mining contractors, infrastructure companies, consulting firms, university porfessors, students and the general public involved in the subject.
TESTIMONIALS
The teacher manages the topics covered in this course perfectly, his lectures are very theoretical and at the same time practical.
Cynthia, Yauli Cuadrado
Hydrogeology - Hydrogeologist
Klohn Crippen Berger
Peru
A really great course that develops the general and necessary aspects of the laboratory data analysis procedure.
Hugo Ivan, Sereno Villaseñor
College Student
Universidad Latina de América
Mexico
Really good. It has exceeded what I was looking for from the course since a I learned to use the software correctly and in a really clear way.
Erick Antonio, Brenes Rodríguez
Operations - Manager
Tecnosolum Consultores Geotécnicos
Costa rica
Excellent course, you can learn many things each day, the theoretical is put into practice in the day to day of the working day.
Fausto Grover, Valentin Japa
Geomechanics - Geomechanical Engineer
Cía Minera KOLPA
Peru
COSTS, SYLLABUS, OTHERS:
To serve you correctly, we handle several quotes that are based on the various needs of our clients.
We have implemented an automated system that will take care of you. We would appreciate it if you register and the system will automatically send you to your email:
► Brochure of the diploma (modality, duration, curriculum, others).
► Quotation of the diploma course (costs, means of payment, forms of financing, others).
► Immediate free access to a DEMO course in the virtual campus so that you can have an experience of it.
REGISTRATION FORM: Diploma Registration Form
NOTE: This registration will not generate any commitment with our institution, the objective is to be able to send you the information of the diploma course.
NEWSLETTER
If you like, you can also keep up to date with our activities and free contributions through our Message Center by entering here: http://goo.gl/qtmrHi
Best regards,
International Geotechnical Center - CGI
CGI PERU: ✆Telephone:(511) 485-1540 / 642-9705, Cellphone-Whatsapp:(51) 923 065 359
CGI CHILE: ✆ Telephone:(56) 232109658
CGI MEXICO: ✆ Telephone:(52) 5541708066
CGI ARGENTINA: ✆ Telephone:(54) 1152188717
CGI USA: ✆ Telephone:(1) 3473445811
✉ information@centrogeotecnico.
www.centrogeotecnico.com
Lima – Peru
BRIEF SUMMARY
Module 1 of the diploma in Geotechnical Design of Tailings Dams, Waste Dumps, and Leaching Pads aims to review various fundamental concepts for the subsequent analysis and geotechnical design of these structures. For example, the relationship each of these structures has with the mining production cycle and their importance within the social, environmental, and economic framework. Likewise, concepts and theories of soil behavior regarding stress, deformation, strength, and coupled flow will be reviewed (e.g., critical state soil mechanics, stress-dilatancy theory in sandy soils, influence of anisotropy on the undrained strength of clayey soils) along with modern approaches to laboratory and field testing for adequate geotechnical characterization. Using this theoretical framework, historical cases of tailings dam failures such as those that occurred at Mount Polley (2014), Fundão (2015), and Feijão I (2019) will be studied. Finally, the most recent international regulations and guidelines for the design of mining waste structures, such as the Global Industry Standard on Tailings Management (GISTM), the technical bulletin of the Australian National Committee on Large Dams (ANCOLD), and the International Commission on Large Dams (ICOLD), will be reviewed to understand how geotechnical knowledge adds value within the broader framework of management and governance that allows for the safe construction, operation, and closure of tailings dams, waste dumps, and leaching pads.
BENEFITS
► Receive certification in the name of the International Geotechnical Center as a specialist in Tailings Dams, Waste Dumps, and Leach Pads Design.
► Get trained by an experienced speaker in the field.
► Receive slides and materials for each module.
► Be able to make necessary academic inquiries through the CGI Virtual Campus forums.
► Choose the start date and complete the diploma at your own pace and schedule within the access period. You can pause and review the videos as many times as needed to grasp the knowledge being imparted.
► Access a network of professionals from various countries worldwide. Our diploma program includes technicians, university students, engineers, master's, doctoral, and post-doctoral candidates, as well as individuals from various professional backgrounds.
► Access the database of participant inquiries and responses, as well as technical reports generated in each module and supporting theses.
OBJECTIVES
► Identify the need for mining waste deposits in the context of both small and large-scale mining.
► Study soil behavior in terms of stress, deformation, strength, and flow, with reference to critical state soil mechanics.
► Understand the significance of stress and dilatancy mechanisms in sandy soils.
► Evaluate undrained strength in clayey soils, considering critical factors such as anisotropy of shear mode, deformation rate, and sensitivity.
► Explore various laboratory tests available in both industry and research contexts, such as axisymmetric triaxial tests (UU, ICU, ICD, KoCU, KoCD), and cyclic tests. Additionally, investigate research-level tests like hollow cylinder torsional shear tests and scale model centrifuge tests to characterize stress, deformation, strength, and flow behavior.
SYLLABUS
► Module 1: Introduction and General Topics
a. Mining Production Cycle
i. Tailings Deposits
ii. Waste Dumps
iii. Leach Pads
iv. Other associated mining structures (stockpiles, DMOs, haul roads)
b. Historical Cases of Mining Structure Failures
i. Failures of tailings dams during the Chilean earthquake (1985)
ii. Mount Polley Tailings Storage Facility
iii. Fundao Tailings Dam (San Marco)
iv. Cadia Tailings Dam
v. Feijao I Tailings Dam (Brumadinho)
c. Geotechnical Exploration
i. Purpose and Scope
ii. Exploration Methods
iii. Geotechnical Exploration Program
d. Laboratory Tests
i. Standard Tests
ii. Triaxial Tests CU, CD, UU
iii. Large-Scale Shear Tests
iv. Long-Deformation Cyclic Tests
v. Small-Deformation Cyclic Tests
vi. Tests under Partially Saturated Conditions
vii. Special Tests for Tailings
e. Material Strength, Deformation, and Permeability
i. Soil Behavior under Shear
ii. Drained Shear Strength
iii. Undrained Shear Strength
iv. Failure Criteria
v. Soil Compressibility and Consolidation Theory
vi. Estimation of Deformation Properties
vii. Hydraulic Conductivity Evaluation
f. Instrumentation and Monitoring
i. Piezometer Design
ii. Functioning of Benchmarks, Inclinometers, and Settlement Cells
iii. Radar, Lidar, and Drone Technology
iv. Data Recording and Interpretation
v. Alert Levels
vi. Case Study
g. Management, Design, Operation, and Governance Standards
i. New Global Tailings Management Standard (GISTM)
ii. ANCOLD Guide 2019
iii. ICOLD Guide 2020 (under review)
Centro Geotécnico Internacional - CGI
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 941 621 841
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
✉ information@centrogeotecnico.com
BRIEF SUMMARY
BENEFITS
► Receive certification in the name of the International Geotechnical Center as a specialist in Tailings Dams, Waste Dumps, and Leach Pads Design.
► Get trained by an experienced speaker in the field.
► Receive slides and materials for each module.
► Be able to make necessary academic inquiries through the CGI Virtual Campus forums.
► Choose the start date and complete the diploma at your own pace and schedule within the access period. You can pause and review the videos as many times as needed to grasp the knowledge being imparted.
► Access a network of professionals from various countries worldwide. Our diploma program includes technicians, university students, engineers, master's, doctoral, and post-doctoral candidates, as well as individuals from various professional backgrounds.
► Access the database of participant inquiries and responses, as well as technical reports generated in each module and supporting theses.
OBJECTIVES
► Identify the different types of zoning based on deposit classification.
► Study concepts related to foundation preparation.
► Understand the importance of proper filter design through case studies of piping failures and the study of design methodologies.
► Review various tailings disposal technologies and emphasize the difference between water dams and tailings dams.
► Evaluate the advantages of rockfill dams with concrete faces for large-scale operations and the treatment applied to waterproof the foundation (grouting and cut-off walls).
► Conduct stability analysis under static and seismic conditions using simplified displacement methodologies.
► Review a case study applying nonlinear dynamic analysis in 2D using finite difference software with the use of advanced constitutive models (PM4Sand and SANISand-Sf).
SYLLABUS
► Module 2: Tailings Deposits with Borrow Material Dam
a. Dams types, selection, and examplesb. Foundation preparation
c. Internal Erosion and Filter Design
Centro Geotécnico Internacional - CGI
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 941 621 841
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
✉ information@centrogeotecnico.com
BRIEF SUMMARY
BENEFITS
► Receive certification in the name of the International Geotechnical Center as a specialist in Tailings Dams, Waste Dumps, and Leach Pads Design.
► Get trained by an experienced speaker in the field.
► Receive slides and materials for each module.
► Be able to make necessary academic inquiries through the CGI Virtual Campus forums.
► Choose the start date and complete the diploma at your own pace and schedule within the access period. You can pause and review the videos as many times as needed to grasp the knowledge being imparted.
► Access a network of professionals from various countries worldwide. Our diploma program includes technicians, university students, engineers, master's, doctoral, and post-doctoral candidates, as well as individuals from various professional backgrounds.
► Access the database of participant inquiries and responses, as well as technical reports generated in each module and supporting theses.
OBJECTIVES
► Identify the importance of coarse cycloned tailings as a construction material.
► Study concepts related to the characterization of thickened underflow tailings (U/F).
► Understand the significance of proper filter design and how to assess cases where they were constructed without meeting technical specifications.
► Evaluate the treatment applied to waterproof the foundation (grouting and cut-off walls).
► Conduct stability analysis under static and seismic conditions.
SYLLABUS
► Module 3: Coarse Cycloned Sand Tailings Deposits (Underflow)
a. Introduction
b. Design Considerations
c. Rockfill Dams with Concrete Face (CFRD)
d. Characterization of Tailings U/F
e. Stability Analysis
f. Seismic Design
g. Tailings Disposal
e. Case - Evaluation of Filters that Do Not Meet Technical Specifications
f. Construction Method using Hydraulic Cells
Centro Geotécnico Internacional - CGI
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 941 621 841
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
✉ information@centrogeotecnico.com
BRIEF SUMMARY
BENEFITS
► Receive certification in the name of the International Geotechnical Center as a specialist in Tailings Dams, Waste Dumps, and Leach Pads Design.
► Get trained by an experienced speaker in the field.
► Receive slides and materials for each module.
► Be able to make necessary academic inquiries through the CGI Virtual Campus forums.
► Choose the start date and complete the diploma at your own pace and schedule within the access period. You can pause and review the videos as many times as needed to grasp the knowledge being imparted.
► Access a network of professionals from various countries worldwide. Our diploma program includes technicians, university students, engineers, master's, doctoral, and post-doctoral candidates, as well as individuals from various professional backgrounds.
► Access the database of participant inquiries and responses, as well as technical reports generated in each module and supporting theses.
OBJECTIVES
► Identify the importance of filtered tailings in reducing the risk of catastrophic failures.
► Study concepts related to filtration techniques.
► Understand the importance of proper compaction within the framework of critical state soil mechanics.
► Evaluate the deformation analysis of these deposits using numerical simulation.
► Review real case studies.
SYLLABUS
► Module 4: Filtered Tailings Deposits and Co-Disposal
a. Characterization of Co-disposed Filtered Tailings
b. Zoning of Deposits
c. Stability and Deformation Analysis
d. Seismic Design
e. Waterproofing
f. QA - QC
g. Case Studies
Centro Geotécnico Internacional - CGI
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 941 621 841
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
✉ information@centrogeotecnico.com
BRIEF SUMMARY
BENEFITS
► Receive certification in the name of the International Geotechnical Center as a specialist in Tailings Dams, Waste Dumps, and Leach Pads Design.
► Get trained by an experienced speaker in the field.
► Receive slides and materials for each module.
► Be able to make necessary academic inquiries through the CGI Virtual Campus forums.
► Choose the start date and complete the diploma at your own pace and schedule within the access period. You can pause and review the videos as many times as needed to grasp the knowledge being imparted.
► Access a network of professionals from various countries worldwide. Our diploma program includes technicians, university students, engineers, master's, doctoral, and post-doctoral candidates, as well as individuals from various professional backgrounds.
► Access the database of participant inquiries and responses, as well as technical reports generated in each module and supporting theses.
OBJECTIVES
► Review the fundamental concepts of critical state soil mechanics.
► Study in detail the causes that led to the failure of the Feijão I dam (Brumadinho, Brazil).
► Evaluate various factors in the laboratory to understand the factors that control the magnitude, triggering, and fragility of the materials.
► Determine if a material is susceptible to static liquefaction using CPTu tests and empirical methodologies.
► Provide recommendations for conducting stability analyses.
SYLLABUS
► Module 5: Static Liquefaction in Tailings Deposits
a. Characterization of Co-disposed Filtered Tailings
b. Zoning of Deposits
c. Stability and Deformation Analysis
d. Seismic Design
e. Waterproofing
f. QA - QC
g. Case Studies
Centro Geotécnico Internacional - CGI
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 941 621 841
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
✉ information@centrogeotecnico.com
BRIEF SUMMARY
Module 6 of the diploma in Geotechnical Design of Tailings Dams, Waste Dumps, and Leaching Pads aims to delve into the key aspects of the geotechnical design of waste dumps (excess material deposits, spoil heaps, or dumps). Unlike tailings deposits, these structures are composed of various materials, including large blocks, making their characterization difficult due to the size of laboratory equipment and the impracticality of using field tests. Waste dumps have different design criteria compared to tailings deposits, and the current state of practice is summarized in the book “Guidelines for Mine Waste Dump and Stockpile Design” (2017) by editors Mark Hawley and John Cunning.
The module begins with a review of the dynamic analysis of mine waste deposits using advanced constitutive models (SANISAND-Sf and PM4Sand). This will involve a case study of an existing tailings dam located in a high seismic activity area. Details will be explored regarding the characterization of the materials involved, the selection of the design earthquake according to the classification of the deposit, the processing of time history records to be used, criteria for defining mesh size, calibration of the models with cyclic laboratory results, and finally the results obtained in terms of horizontal and vertical displacements (settlements) and generation of excess pore pressure (potential cyclic liquefaction). These results will be used to evaluate whether the deposit will suffer severe or moderate damage due to the selected earthquake.
Subsequently, key aspects in the design of waste dumps will be studied, such as the appropriate site selection for constructing the structure, the risk classification of the deposit, which differs from that used for tailings deposits, the characterization of materials, especially mine waste, using laboratory tests, and stability and deformation analyses. Details will also be covered on other factors influencing the performance of waste dumps, such as water management, risk management, management of acid-generating materials, and the use of emerging technologies in the disposal of waste materials.
BENEFITS
► Receive certification in the name of the International Geotechnical Center as a specialist in Tailings Dams, Waste Dumps, and Leach Pads Design.
► Get trained by an experienced speaker in the field.
► Receive slides and materials for each module.
► Be able to make necessary academic inquiries through the CGI Virtual Campus forums.
► Choose the start date and complete the diploma at your own pace and schedule within the access period. You can pause and review the videos as many times as needed to grasp the knowledge being imparted.
► Access a network of professionals from various countries worldwide. Our diploma program includes technicians, university students, engineers, master's, doctoral, and post-doctoral candidates, as well as individuals from various professional backgrounds.
► Access the database of participant inquiries and responses, as well as technical reports generated in each module and supporting theses.
OBJECTIVES
► Detailed Review of Dynamic Analysis of Mine Waste Deposits
► Study Key Aspects in the Design of Waste Dumps
► Evaluate the Method Proposed by Hawley and Cunning (2017) for Classifying Waste Dump Deposits According to Their Risk Potential
► Determine Shear Strength Properties of Waste Dump Materials Using Laboratory Tests
► Provide Additional Recommendations Such as Water Management, Risk Management, Management of Acid-Generating Materials, and Showcase Emerging Technologies in Waste Dump Material Handling
SYLLABUS
► Module 6: Waste Dumps
a. Nonlinear Dynamic Analysis (NDA) of Mine Tailings Deposits
b. Important aspects in the design of waste deposits ("clearings")
c. Design Guides and Construction Criteria
d. Classification of waste deposits
e. Characterization of Mine Waste Materials
f. Stability and deformation analysis
g. Water Management and Geochemical Considerations
Centro Geotécnico Internacional - CGI
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 941 621 841
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
✉ information@centrogeotecnico.com
BRIEF SUMMARY
Module 7 of the diploma in Geotechnical Design of Tailings Dams, Waste Dumps, and Leaching Pads aims to delve into the most important aspects of the geotechnical design of Leaching Pads (heap leach piles). Unlike tailings and waste dump deposits, these structures do not store waste but are crucial for the profitability of mining operations as they process minerals. Therefore, the economic viability of mining projects where they are constructed depends on their performance.
Leaching pads have numerous operational design criteria, unlike tailings and waste dump deposits. Currently, there is no updated guide summarizing the current state of practice as with tailings deposits (GISTM) and waste dump deposits ("Guidelines for Mine Waste Dump and Stockpile Design" book from 2017 by editors Mark Hawley and John Cunning).
BENEFITS
► Receive certification in the name of the International Geotechnical Center as a specialist in Tailings Dams, Waste Dumps, and Leach Pads Design.
► Get trained by an experienced speaker in the field.
► Receive slides and materials for each module.
► Be able to make necessary academic inquiries through the CGI Virtual Campus forums.
► Choose the start date and complete the diploma at your own pace and schedule within the access period. You can pause and review the videos as many times as needed to grasp the knowledge being imparted.
► Access a network of professionals from various countries worldwide. Our diploma program includes technicians, university students, engineers, master's, doctoral, and post-doctoral candidates, as well as individuals from various professional backgrounds.
► Access the database of participant inquiries and responses, as well as technical reports generated in each module and supporting theses.
OBJECTIVES
► Understanding the concept of leaching and its application in geotechnical engineering applied to mining
► Evaluating the most appropriate use of leaching pads for mineral extraction, as well as the use of binders
► Using geotechnical research methods to characterize the mineral (ore)
► Characterizing the properties of geosynthetics that make up the lining system of the leaching pad (geotextiles and geomembranes) for a proper understanding of Technical Specifications and subsequent quality control and assurance in the field
► Geotechnically evaluating leaching pads considering aspects such as mineral (ore) characterization with laboratory tests, stability under static and pseudostatic conditions, flow considering partially saturated conditions, permanent deformations using simplified methods, seismic response
► Reviewing more advanced geotechnical concepts such as 3D slope stability analysis and nonlinear dynamic analysis in 3D
SYLLABUS
► Module 7: Leaching pads
* Design guide
* Characterization of Ore
* Characterization of liners
* Zoning if the pad
* Influence of partially saturated soils
* Stability and deformation analysis
Centro Geotécnico Internacional - CGI
CGI PERÚ: ✆Fijo:(511) 485-1540 / 642-9705, Móvil-Whatsapp (51) 941 621 841
CGI CHILE: ✆ Fijo:(56) 232109658
CGI MEXICO: ✆ Fijo:(52) 5541708066
CGI ARGENTINA: ✆ Fijo:(54) 1152188717
CGI USA: ✆ Fijo:(1) 3473445811
✉ information@centrogeotecnico.com
